Design Of Steel Structures

Design Of Steel Structures
Lecture Series on Design of Steel Structures by Dr.Damodar Maity, Department of Civil Engineering,IIT Guwahati.
Mod-1 Lec-1 Introduction to Design of Steel Structures
Mod-2 Lec-1 Connections
Mod-2 Lec-2 Riveted Connections
Mod-2 Lec-3 Design of Rivet Joint
Mod-2 Lec-4 Welding
Mod-2 Lec-5 Design of Fillet and Butt Welds
Mod-2 Lec-6 Bolted Connection
Mod-3 Lec-1 Eccentric Connections: Rivet Joints
Mod-3 Lec-2 Design of Eccentric Connection With Load Lying in Plane of Joint(Rivet&Bolt)
Mod-3 Lec-3 Eccentric Connection With Load Perpendicular to Plane of Riveted Joint
Mod-3 Lec-4 Analysis and Design of Join with Seat Connection
Mod-3 Lec-5 Eccentric Connection
Mod-3 Lec-6 Load Lying Perpendicular to the Plane of Weld Joint: Fillet and Butt Weld
Mod-4 Lec-1 Tension Member
Mod-4 Lec-2 Design of Tension Member
Mod-4 Lec-3 Design of Tension Member: Gusset Plates. Lug Angles and Tension Splices
Mod-4 Lec-4 Design of Tension Member: Subjected to Axial and Bending
Mod-5 Lec-1 Compression Member
Mod-5 Lec-2 Design of Compression Member
Mod-5 Lec-3 Design of Eccentrically Loaded Tension Member
Mod-5 Lec-4 Built up Compression Member
Mod-5 Lec-5 Design of Built up Compression Member
Mod-5 Lec-6 Lacing for Built Up Compression Member
Mod-5 Lec-7 Design of Lacing System
Mod-5 Lec-8 Design of Batten PLates
Mod-6 Lec-1 Introduction to Flexural Members: Beams
Mod-6 Lec-2 Design Procedure of Beam Members
Mod-6 Lec-3 Design of Laterally Supported Beams
Mod-6 Lec-4 Design of Laterally Unsupported Beams
Mod-6 Lec-5 Built-Up Beams
Mod-6 Lec-6 Built-Up Beams: Curtailment of the Flange Plates and Shear Connections
Mod-6 Lec-7 Design of a Built-Up Beams
Mod-6 Lec-8 Design of Shear Connections and Purlins
Mod-7 Lec-1 Gantry Girders
Mod-7 Lec-2 Design of Gantry Girders
Mod-7 Lec-3 Introduction to Plate Girders-Part 1
Mod-7 Lec-4 Introduction to Plate Girders-Part 2
Mod-7 Lec-5 Design of a Plate Girder
Mod-8 Lec-1 Column Base Part-1